kerongiant.blogg.se - N1mm logger configuration files

N1MM LOGGER CONFIGURATION FILES SERIAL
N1MM LOGGER CONFIGURATION FILES DRIVERS
N1MM LOGGER CONFIGURATION FILES ARCHIVE
N1MM LOGGER CONFIGURATION FILES SOFTWARE
N1MM LOGGER CONFIGURATION FILES WINDOWS

This box cannot be checked if this port is used for radio control.

Digital – Checking this box means this port is used for digital communication (MMTTY/MMVARI/Fldigi engine or TNC).

If you have only one radio connected, only one of the boxes in this column should be configured to anything other than “None” Select ‘None’ if this port is not being used for radio control. A maximum of two radios can be connected. control of the radio’s frequency and mode.

Radio – The pull-down list in the box in this column can be used to select a radio that is to be interfaced with the program using this port for radio control, i.e.

If a different COM port is selected from the list, the missing COM port denoted by the asterisk will disappear from the pull-down list.

N1MM LOGGER CONFIGURATION FILES SOFTWARE

This can be corrected by connecting the USB adapter or creating the software virtual port in the other software, then reopening and closing the Configurer The function that should be provided by this port will be unavailable.

If this asterisked device is left configured for COM6, after exiting the Configurer the program will issue a warning that it was unable to open the port.

N1MM LOGGER CONFIGURATION FILES SERIAL

This could be the result of a USB-to-serial adapter being unplugged, or as the result of other software that had previously created a virtual serial port but that was not running at the time the Configurer was opened

The asterisk indicates that this port was previously configured at this position in the N1MM Logger.ini file, but when the Configurer was opened, the program was unable to open the port. COM6 also appears on the example list above, but with an asterisk beside it.

N1MM LOGGER CONFIGURATION FILES DRIVERS

These ports might include real serial ports, USB-to-serial adapters, and/or virtual serial ports created by software drivers (e.g. In this example, COM1, COM2, COM5 and COM10 were found by the program when the Configurer window was opened. This list displays all of the COM ports the program was able to open.The radio has two receivers and the program is configured for SO2V (Single Operator, 2 VFOs) with two Entry windows, one for each VFO/receiver. COM10 is connected to a TNC or terminal unit for RTTY.

COM2 is being used for a Winkeyer for CW keying. COM6 is used for radio control of an Elecraft K3. This example screen shot shows a case in which three COM ports are being used. Port – for each device that is to be connected via a COM port, the COM port number is selected in this column from a pull-down list:.Set up each port depending on what equipment is connected and enter the appropriate information.Ī more detailed explanation of each of the controls on this window follows. The program supports up to 8 serial ports, each of which can be anywhere in the range COM1-COM99, and 3 parallel ports (LPT1 – LPT3). If you do not have one of the items listed connected to a port, make sure the port selection is ‘None’ and the check boxes are not checked for that port. Set the values appropriate to your station. The Hardware tab is used to set up your radios, packet interfaces, telnet connections, CW/PTT/digital ports and the interfaces to other devices, such as SO2R controllers, multi-purpose interfaces, and keyers, if they require serial or parallel ports. You will see “N1MM Logger” with a Type of “Configuration Settings”.

N1MM LOGGER CONFIGURATION FILES WINDOWS

If you have not unchecked “Hide extensions for known file types” in Windows Explorer Options, you will not see N1MM Logger.ini. The N1MM Logger.ini file contains the name of the database file you were last using, which the program will load when it is started, as well as the name of the current contest and other recently-opened contests. You will need to export them from that database and load them into another database before they would show up there. That means, for example, that function key definitions loaded or modified when you are using one database will only appear in that database. ini file, but in the database that was in use when you loaded them. Function key definitions, telnet clusters, call history, and country information are not saved in the. Be careful in setting up items on the different tabs, to be sure that you understand that the option you are choosing is what you want.Ĭonfigurer settings are remembered by the program in the N1MM Logger.ini file, which is in the N1MM Logger+ user files area. The Configurer has many tabs with program settings influencing all aspects of the behavior of the program. The Configurer is our name for the tabbed dialog that appears when you click Config on the Entry Window top menu, and then choose Configure Ports, Mode Control, Audio, Other.

Setup DX, DXpedition, and General Purpose Contests.

Windows – Table of Contents View (long).

Call History and Reverse Call History Lookup.

N1MM LOGGER CONFIGURATION FILES ARCHIVE

Archive Files (1/2021) – N1MM on WindowsXP.